Rain Harvesting Mozzie Stoppa Easy Clean

$9.00

SKU: TATO27 Category:

Rain Harvesting Mozzie Stoppa Easy Clean

Protect your rainwater quality by keeping mosquitoes and other pests out of your tank with this Mozzie Stoppa Easy-Clean, spring-loaded hinge mosquito-proof outlet screen.

The mosquito-proof 955 micron stainless steel screen flips open on a simple, spring-loaded hinge for super-Easy-Cleaning and maintenance. Simply unlatch the screen, brush or hose off any dirt and return it to the closed position.

Keep mosquitoes out

The Mozzie-Stoppa Easy-Clean protects your rainwater from contamination by mosquitoes and other pests by preventing them from accessing your tank via your tank overflow outlet pipe. Importantly, it still lets water flow out so your tank outlets can continue to fulfil their main purpose, uninterrupted.

Let your tank breathe safely

Tank ventilation is important for the health of your rainwater. The Mozzie-Stoppa Easy-Clean lets your tank breathe safely without the risk of compromised quality from pest contamination.

Installation
New or upgrading from a non-glued Mozzie Stoppa Original
  1. Select an installation point for your Mozzie Stoppa Easy-Clean. As it will require regular maintenance, we recommend installing your Mozzie-Stoppa Easy-Clean in a position that allows for easy access and cleaning. We recommend installing it directly into the overflow outlet of your tank.
  2. Remove the non-glued Mozzie Stoppa Original from the overflow outlet and overflow pipe and discard.
  3. If necessary, measure and remove a section of pipe leaving a gap between your overflow outlet and overflow pipe of approximately 25mm for your Mozzie Stoppa Easy-Clean, ensuring all cut edges are clean and smooth.
  4. Position your Mozzie Stoppa Easy-Clean so the screen opens upward. Use solvent weld glue to install the Mozzie Stoppa Easy-Clean into the gap you made in Step 3, between your overflow outlet and overflow pipe.
Upgrading from a glued Mozzie Stoppa Original or overflow pipe
  1. Measure and remove a section of pipe leaving a gap between your overflow outlet and overflow pipe of approximately 25mm for your Mozzie Stoppa Easy-Clean, ensuring all cut edges are clean and smooth.
  2. Carefully remove the left-over pipe section or Mozzie Stoppa Original by cutting out and removing from the overflow outlet.
  3. Position your Mozzie Stoppa Easy-Clean so the screen opens upward. Use solvent weld glue to install the Mozzie Stoppa Easy-Clean into the gap you made in Step 1, between your overflow outlet and overflow pipe.

Brand

Rain Harvesting

Wishlist 0
Continue Shopping