0 Comments
1050 LT Pro Plastics Round Tank with Medium Garden Pump

$545.00

Clear
    See below for detailed information on Installation Guidelines

Description

Pro Plastics 1050LT  Round Water Tank

This tank holds ample water for different uses around the home or garden

Pro Plastics is a proudly 100% Australian made & owned, family operated business and all of our products are made right here in Australia. Unlike many tank manufactures, our water tanks are certified to the Australian Standards Specifications AS/NZS 4766. This certifications provides independent assurance that our products are built to last in Australian conditions.

ASC 075PC Domestic Water Pump

The ASC075PC is a self priming pump suitable for spear point applications. With self priming capabilities, the pump has a suction capacity of 9 meters. It also means the pump will automatically re-prime in the event of running dry from your water source. The pump is suitable for domestic and garden application. The ASC 075PC comes with an automatic pressure controller that will start and stop the pump on demand, and also includes dry run protection.

Pump Characteristics:

  • Automatic Pressure Controller to turn the pump on and off on demand, with built in dry run protection.
  • Run dry protection to prevent pump damage.
  • Automatic electronic control has in-built check valve to prevent water back flow through the pump.
  • 2.2bar pump cut in for greater versatility.
  • Corrosion resistant pump body, diffuser and stainless steel impeller to ensure pump durability.
  • High quality mechanical shaft seal and high quality bearings.
  • 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
  • IP55 Protection / Insulation F
  • 9m suction head
 Applications:
  • Suitable for medium to large garden irrigation and whole of house double storey domestic home.

Motor / power: 550W
Amps: 3.8A
Max. flow: 68T/min
Taps: 5-6 taps (calculated at 12lt/min)
Head: 37m
Rated Head: 22m
Suction hose diameter: 1″ / 25mm
Pressure: 370kPa
Body: Stainless steel
Impeller: Stainless steel
Mechanical Seal : Carbon/Ceramic/Nitrile
Warranty on pump: 2 Years

asc-pump-curves

Installation Guide

  • Water Tank & Water Pump to be supplied by ASC Water Tanks
  • Connection from a single downpipe and run 90mm Stormwater pipe to the tank inlet up to three meters away.
  • Position tank on existing concrete or crushed rock base
  • Fit tank overflow pipe back to downpipe outlet
  • Pump suction line to be 25mm flexible reinforced poly pipe with ball valve (Pump Kit*)
  • Pump discharge to a single tap up to 3 meters away, pipe work to be ¾” Hard drawn copper pipe
  • Delivery Zone must be covered under Melbourne Metro. Installations outside this zone will incur a small fee (POA).

* If choosing to go with an ASC Supply & Installation, you are required to select “Pump Kit” under options. We also highly recommend the pump cover.

Optional extras:

  • Connect second downpipe up to 3 metres away $135.00 inc GST
  • Second outlet tap up to 20 metres away clear open ground, pipework to be ¾” copper above ground and 25mm PN12.5 poly pipe underground to the tap $330.00 inc GST
  • Crushed rock base that would be boxed up onsite and consolidated with vibrating plate POA
  • Concrete base boxed up with REO mesh POA
  • Install Tank Level Gauge POA
  • Install First Flush Diverter POA
  • Install Leaf Eater POA

Additional information

Capacity

1000LT

Tank Colour

, , , , , , , , , , , , , , , , , , , , , , , ,

Warranty

10 Years Manufacturers Tanks , 2 Years Warranty on Water Pumps

0

Your Cart