2100 LT Lowline Tank with Small Garden Pump




S-Line 2100LT Lowline Rain Water Tank

The S-Line 2100LT lowline rain watertank stores up to 2100L. Designed to sit under a window sill, it’s narrow profile and short lengths, make it the ideal tank to fit between appliances. The 2100LT lowline tank can also be installed in areas where you have a low gutter height, and is also used for areas under decks and under the house.

Made from Food Grade UV20 Polyethylene you can be assured of quality water storage for your home and garden.  The tank includes 2 x 1” BSP Brass fittings (1 at each end) as well as an overflow on the same end as the inlet.

An integral part of the tank design is a height of just 1550mm.

ASC 037PC Domestic Water Pump

The ASC037PC is a self priming pump suitable for spear point applications. With self priming capabilities, the pump has a suction capacity of 9 meters. It also means the pump will automatically re-prime in the event of running dry from your water source. The pump is suitable for domestic and garden application. The ASC 037PC comes with an automatic pressure controller that will start and stop the pump on demand, and also includes dry run protection.

Pump Characteristics:

  • Automatic Pressure Controller to turn the pump on and off on demand, with built in dry run protection.
  • Run dry protection to prevent pump damage.
  • Automatic electronic control has in-built check valve to prevent water back flow through the pump.
  • 2.2bar pump cut in for greater versatility.
  • Corrosion resistant pump body, diffuser and stainless steel impeller to ensure pump durability.
  • High quality mechanical shaft seal and high quality bearings.
  • 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
  • IP55 Protection / Insulation F
  • 9m suction head
  • Suitable for small to medium garden irrigation and single storey small domestic home.

Motor / power: 370W
Amps: 2.4A
Max. flow: 50T/min
Taps: 4 taps (calculated at 12lt/min)
Head: 37m
Rated Head: 20m
Suction hose diameter: 1″ / 25mm
Pressure: 370kPa
Body: Stainless steel
Impeller: Stainless steel
Mechanical Seal : Carbon/Ceramic/Nitrile
asc-pump-curvesWarranty on pump: 2 Years



A | 100mm
B | 170mm
D | 197mm
E| 128mm
F | 88mm
L | 365mm
H | 182mm
H1 | 178mm
H2 | 88mm
DNA | 25mm
DNM | 25mm


1 . Plug
2. Washer
3. Dust Cap
4. Inside Hexagonal Bolt
5. Pump Housing Component
6. O-Ring
7. O-Ring
8. Ejector
9. Hexagonal Nut
10. Washer
11. Impeller
12. Spring Washer
13. Mechanical Seal
14. Motor

Additional information



Tank Colour

, , , , , , , , , , , , , , , , , , , , , , , ,


10 Years Manufacturers Tanks , 2 Years Warranty on Water Pumps


Your Cart