DAB 132MPCI Cast Iron Pressure Pump with iPRESS

0 Comments
DAB 132MPCI Cast Iron Pressure Pump with iPRESS

$605.00

SKU: DAB-132MPCI Categories: , ,

Description

DAB-132MPCI Cast Iron Pressure Pump with iPRESS

Self priming stainless steel and cast iron jet pumps DAB jet pumps are renowned for their unique self priming and extraordinary deep suction capability: up to 9 metres at sea level. Available in Cast Iron and stainless steel, they are designed to handle abrasive and corrosive water which makes them ideally suited for spear point applications. 2 year pump parts & labour warranty.

Automatically restarts after water loss or interrupted power.
Dry run protection protects pump from damage
Eliminates water hammer protecting plumbing
Compact size for easier installation

Motor / power: 1000W
Volt:  240V
Horsepower: 1.36hp
Head: 48m
Max Flow Rate: 80lt/min
Tap Guide: 8 taps
Warranty on pump: 2 Year

 

 

For DAB 6 Year Extended Warranty Information, please click here.

 

The new iPRESS controller combines the advantages of both a standard pressure switch and a typical electronic automatic restart controller

 


Features and Benefits

 

  • Starts and stops the pump automatically when the tap is open or closed. This means the operator does not need to turn off the pump after use.
  • Maintains a constant pressure during operation resulting in a reliable water supply when required
  • Automatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed
  • Automatically restarts normal operation in the event of power being cut off to the control. This gives the homeowner peace of mind that the unit will continue to operate even if they are away on holidays
  • Controller is able to keep the pump running at flows as low as 0.5L/min to maintain water supply
  • Plug and play leads (IEC type) installed on the controller so that a licensed electrician is not required to replace the controller if required
  • Change between Mode 1 (Change Cut In pressure only) and Mode 2 (Change Cut In and cut out) via a single button push.
  • Real time indication of system pressure displayed so a separate in line pressure gauge is not required
  • Special non return valve to avoid water surging.

 

Technical Specifications
Brand: White International
Casing Material: Technopolymer
Kilo Watts: 2.2 kW
Port Size Inlet: 1″ BSPM Inlet
Port Size Outlet 1″ BSPM outlet
Product Type: Pump Controller
Volts: 240 V

 

Construction Characteristics
Inlet: 1″ BSP male
Outlet:1″ BSP male
Special Built in non-return valve to avoid surges – YES
No flow/loss of prime protection
Manual start switch (RESET)
Voltage LED (GREEN power on light) – YES
Pump working LED (ORANGE pump on light) – NO
Security System LED (STATUS) – YES
1.5 metre lead and 3 pin Australian/New Zealand plug
0.6 metre pump power lead, 3 pin plug and play
Adjustable Cut In (start Pressure)

 

Technical Information
Voltage: 220V (-6%) / 240V (+6%)
Maximum Current: 20(16) Amps
Maximum kW: 2.2kW
Frequency: 50Hz
Ingress Protection: IP65
Maximum Water Temperature: 60 deg C
Starting Pressure: 0.5-6.0 Bar
Stop Pressure: 0.8-9.8 Bar
Maximum Working Pressure: 10 bar
Minimum Flow: 0.5 l/m

 

 

 

 

 

 

 

 

 

65675478186

Additional information

Product Type

Pressure System

Brand

DAB Pumps

Suitable For

Clean Water

Bar

4.8 Bar

Approval

Approved For Drinking Water

Flow Range Category

a. 0 – 99 L/min

Flow Rate (LT/min)

80LT/min

Hp

1.36 Hp

kPa

486 kPa

Kilo Watts

1 kW

Head Range Category

b. 40 – 59 m

Head (max)

48 m

Port Size Inlet

1" BSPF inlet

Port Size Outlet

1" BSPF outlet

Powered

Electric

Taps

8 Taps

Volts

240 V

Warranty

24 months

Watts

1000 W

Pack Weight

16.98 KG

0

Your Cart