DAB EUROINOX40/50MPCI Multistage Self Priming with iPRESS


SKU: DAB EUROINOX40/50MPCI Categories: , ,


DAB-EUROINOX40/50MPCI Self Priming Stainless Steel Horizontal Multistage Pump with iPRESS

Euroinox Stainless Steel Self Priming Horizontal Multistage Pumps. Fully adjustable pressure switch to reduce pressure fluctuations. Stainless steel pump body for bacteria and corrosion resistance. Brass non return valve and fittings for strength and durability. Replaceable TEFC motor with air gap to stop seal failure water entry.  2 year pump parts & labour warranty.

Note: EUROINOX pumps are AS/NZS4020 approved for drinking water.

Motor / power: 800W
Volt:  240V
Horsepower: 1.1hp
Nominal Pressure: 22psi /150kPa
Maximum Pressure: 84psi /579kPa
Head: 57.7m
Max Flow Rate: 80lt/min
Taps: 8
Warranty on pump: 2 Year
Body: Cast Iron & Stainless Steel



For DAB 6 Year Extended Warranty Information, please click here.

The new iPRESS controller combines the advantages of both a standard pressure switch and a typical electronic automatic restart controller

Features and Benefits

  • Starts and stops the pump automatically when the tap is open or closed. This means the operator does not need to turn off the pump after use.
  • Maintains a constant pressure during operation resulting in a reliable water supply when required
  • Automatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed
  • Automatically restarts normal operation in the event of power being cut off to the control. This gives the homeowner peace of mind that the unit will continue to operate even if they are away on holidays
  • Controller is able to keep the pump running at flows as low as 0.5L/min to maintain water supply
  • Plug and play leads (IEC type) installed on the controller so that a licensed electrician is not required to replace the controller if required
  • Change between Mode 1 (Change Cut In pressure only) and Mode 2 (Change Cut In and cut out) via a single button push.
  • Real time indication of system pressure displayed so a separate in line pressure gauge is not required
  • Special non return valve to avoid water surging.

Technical Specifications
Brand: White International
Casing Material: Technopolymer
Kilo Watts: 2.2 kW
Port Size Inlet: 1″ BSPM Inlet
Port Size Outlet 1″ BSPM outlet
Product Type: Pump Controller
Volts: 240 V

Construction Characteristics
Inlet: 1″ BSP male
Outlet:1″ BSP male
Special Built in non-return valve to avoid surges – YES
No flow/loss of prime protection
Manual start switch (RESET)
Voltage LED (GREEN power on light) – YES
Pump working LED (ORANGE pump on light) – NO
Security System LED (STATUS) – YES
1.5 metre lead and 3 pin Australian/New Zealand plug
0.6 metre pump power lead, 3 pin plug and play
Adjustable Cut In (start Pressure)

Technical Information
Voltage: 220V (-6%) / 240V (+6%)
Maximum Current: 20(16) Amps
Maximum kW: 2.2kW
Frequency: 50Hz
Ingress Protection: IP65
Maximum Water Temperature: 60 deg C
Starting Pressure: 0.5-6.0 Bar
Stop Pressure: 0.8-9.8 Bar
Maximum Working Pressure: 10 bar
Minimum Flow: 0.5 l/m




Additional information

Product Type

Pressure System


DAB Pumps

Suitable For

Clean Water


5.77 Bar


Approved For Drinking Water

Flow Range Category

a. 0 – 99 L/min

Flow Rate (LT/min)



1.1 HP


585 kPa

Kilo Watts

0.8 kW

Head Range Category

b. 40 – 59 m

Head (max)

57.7 m

Port Size Inlet

1" BSPF inlet

Port Size Outlet

1" BSPF outlet




8 Taps


240 V


24 months


800 W

Pack Weight

15.20 KG


Your Cart