0 Comments
DAB i132M Cast Iron Spear Point with iPRESS Controller

$663.00

SKU: DAB-i132M Categories: , ,

Description

DAB- i132M Cast Iron Spear Point with iPRESS Controller 

Self priming stainless steel and cast iron jet pumps DAB jet pumps are renowned for their unique self priming and extraordinary deep suction capability: up to 9 metres at sea level. Available in Cast Iron and stainless steel, they are designed to handle abrasive and corrosive water which makes them ideally suited for spear point applications. 2 year pump parts & labour warranty

Motor / power: 1000W
Volt:  240V
Horsepower: 1.36hp
Head: 48m
Max Flow Rate: 80lt/min
Warranty on pump: 2 Year

For technical data sheets, please click here.

For Exploded diagram and spare parts, please click here.

Bianco BIA-iPRESS Controller – Auto Restart and Adjustable Cut in/Cut out

The BIA-iPRESS is a device used to control electric 240V pumps of 2.2kW or less. The iPRESS is the first electric pump controller with a fully adjustable cut in (start) pressure of between 0.5-6.0 bar and a cut out (stop) pressure of between 0.8-9.8 bar. The iPRESS has the ability to operate as either a standard auto restart pressure controller (start pressure to be set) or an automatic restart loss of prime pressure switch (start and stop pressure to be set).

Auto Restart Function
When the pump loses prime it will stop working after 20 seconds then restart after 10 seconds and runs for 40 seconds and then stops. Then after 10 seconds runs for another 40 seconds after which if no water is available the pump will turn off for 24 hours repeating the process every 24 hours until water is available.

Construction Characteristics

  • Real time indication of system pressure displayed on LED display
  • Automatic restart
  • German approved food grade materials
  • Housing PA66 reinforced Nylon

Applications: Suitable for supplying water to domestic households. Also suitable for small scale garden irrigation.
Package Information 1.5kg L 210mm x H 190mm x W 180mm

The new iPRESS controller combines the advantages of both a standard pressure switch and a typical electronic automatic restart controller


Features and Benefits

  • Starts and stops the pump automatically when the tap is open or closed. This means the operator does not need to turn off the pump after use.
  • Maintains a constant pressure during operation resulting in a reliable water supply when required
  • Automatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed
  • Automatically restarts normal operation in the event of power being cut off to the control. This gives the homeowner peace of mind that the unit will continue to operate even if they are away on holidays
  • Controller is able to keep the pump running at flows as low as 0.5L/min to maintain water supply
  • Plug and play leads (IEC type) installed on the controller so that a licensed electrician is not required to replace the controller if required
  • Change between Mode 1 (Change Cut In pressure only) and Mode 2 (Change Cut In and cut out) via a single button push.
  • Real time indication of system pressure displayed so a separate in line pressure gauge is not required
  • Special non return valve to avoid water surging.

Technical Specifications
Brand: White International
Casing Material: Technopolymer
Kilo Watts: 2.2 kW
Port Size Inlet: 1″ BSPM Inlet
Port Size Outlet 1″ BSPM outlet
Product Type: Pump Controller
Volts: 240 V

Construction Characteristics
Inlet: 1″ BSP male
Outlet:1″ BSP male
Special Built in non-return valve to avoid surges – YES
No flow/loss of prime protection
Manual start switch (RESET)
Voltage LED (GREEN power on light) – YES
Pump working LED (ORANGE pump on light) – NO
Security System LED (STATUS) – YES
1.5 metre lead and 3 pin Australian/New Zealand plug
0.6 metre pump power lead, 3 pin plug and play
Adjustable Cut In (start Pressure)

Technical Information
Voltage: 220V (-6%) / 240V (+6%)
Maximum Current: 20(16) Amps
Maximum kW: 2.2kW
Frequency: 50Hz
Ingress Protection: IP65
Maximum Water Temperature: 60 deg C
Starting Pressure: 0.5-6.0 Bar
Stop Pressure: 0.8-9.8 Bar
Maximum Working Pressure: 10 bar
Minimum Flow: 0.5 l/m

 

 

 

For Technical Specifications on iPRESS, please click here  

For Installation guide, please click here.

Additional information

Product Type

Pressure System

Brand

DAB Pumps

Suitable For

Clean Water

Bar

4.8 Bar

Amps

6.5 Amps

Flow Range Category

a. 0 – 99 L/min

Flow Rate (LT/min)

80 LT/min

Hp

1.36 Hp

Kilo Watts

1.0 kW

Head Range Category

b. 40 – 59 m

Head (max)

48m

Port Size Inlet

1" BSPF inlet

Port Size Outlet

1" BSPF outlet

Powered

Electric

Taps

8 Taps

Volts

240 V

Warranty

24 Months

Pack Weight

14.00 KG

0

Your Cart