2000 Litre Razor Water Tank

2400mm
1935mm
560mm

$2,075.00

2000 Litre Razor Slimline Tank

SKU: TP44461

Lead Time: 4 weeks

2000 Litre Team Poly Razor Slimline Tank

SKU: TP44461

Dimensions: 2400L x 560W x 1935H

AVAILABLE IN VIC & SA ONLY

 

The new Razor range of ultra slim rainwater tanks from Team Poly incorporate modern design with cutting edge technology. These one piece rainwater tanks are manufactured from food grade polymers and are UV stabilised to prolong the life of the tank whilst retaining their look. Designed to fit in spaces where most rainwater tanks cannot the Razor range provide a modern unobtrusive answer to your rainwater tank requirements. The ultra slim nature of the Razor range and the compact nature of the Stubby provides maximum flexibility to choose the best fit for your property. Available in two sizes (1000 Litres & 2000 Litres) with widths from only 290mm the Razor can be offered in a wide variety of colour options.

Capacity 2000 Litres
Availability Adelaide & Melbourne
Length 2400mm
Width 560mm
Height 1935mm
Inlet 2 x 200mm Strainers
Outlet 20/25mm brass outlet
Valve 20mm ball valve
Bracket 2 x 560mm Razor Bracket
Overflow 90mm overflow screen and elbow

• 2 Overflow positions
• Options for bucket height taps to be added.

Tank Colours

Select from our huge range of rain water tank colours we offer.

ASC Water Tanks Colour Choices

Need help? Please feel free to give our friendly and highly qualified staff a call on (03) 8795 7715 today for an obligation free quote.

Site Preparation

There are several factors that will determine the most appropriate location of your rainwater tank. First walk around your house and note the locations of your downpipes. The closer the tank is to a downpipe, the simpler your install will be.

Once you have selected an appropriate site, you can begin to prepare this site for the tank.

  1. Check the relevant regulations relating to rainwater tank installation with your local council.
  2. Your Team Poly rainwater tank should be handled with care. When moving into position, avoid rough and sharp surfaces.
  3. The site must be a solid, level and compacted base that extends beyond the diameter of the tank that will not be eroded by wind or rain. Suitable bases include brick, concrete, gravel or solid dolomite surface between 300mm and 400mm in depth.
  4. Water tank stands can be used but must be designed by a qualified consulting engineer.

Tank Plumbing

Please ensure your tank is installed by a qualified plumber in accordance with your local council regulations.

Rainwater Tank Plumbing

Gutters and Roofing

The guttering on your roof is a key component in your rain harvesting system and will need to be cleared of any leaves or debris. Damaged guttering should be repaired.

Test to see if your guttering directs water to the corner of your house where the tank will be installed. If water is not directed towards the corner of your house then it should be adjusted to maximise your rainwater harvest.

Diagram of Fully Integrated Rainwater System

Fully Integrated Rainwater System Diagram

Capacity

2000LT

Dimensions (mm)

2400 L x 560 W x 1935 H

Supplied Accessories

Inlet Strainer, Overflow Screen

Fittings

1 x 20mm brass pump outlet on each end of tank

Water Tank Colour

, , , , , , , , , , , , , , , , , , , ,

Warranty

10 Years Manufacturers Warranty

Brand

Team Poly

Wishlist 0
Continue Shopping